Emerald Innovations EW-2500MG Washer/Dryer User Manual


 
5
Adjust the installation position
The largest permitted slope of the bearing surface of the washing machine is 2.
Slanting or uneven ground will cause unstable operation of the machine. Please
check with following methods:
Hang a becket with weight to confirm if the washing machine is horizontal.
Install the water inlet hose ; Select the water level
Insert the water inlet hose into the water
inlet jointer on the control panel.
(To dismantle the water inlet hose,you only
need to pull the hose out.)
Fill the water to the water level selected
according to the quantity of the laundries.
Attention:
Put in the laundries first before
water inlet.
Do not exceed the "Max " water
level otherwise the water may
overflow out of the machine.
water level
indicator
water inlet hose
Water inlet enrtance
If the water level exceed the "Max "
water level ,in order to protect the
electrical component,the water flow
over to the base from overflow pipe,
flow out the washing machie.